99/Disk Controller Status Code
This parameter is used by service personnel to diagnose disk drive related problems should they
occur.
97/Software Version Number
The "value" of this parameter is the version number of the software currently loaded into the
Mirage. This parameter is your way of determining the exact software you have booted up with,
should there be any doubt.
MIDI Program Change Chart
Shown below are the program change values that will cause the Mirage to load sounds or change
upper or lower programs. Consult the Owner's Manual of your particular MIDI controller for the
proper program transmit number. Following are two tables - the first for the Ensoniq ESQ-1, the
DX - 7 and any other instruments which begin program numbers at #1, and the next showing the
true MIDI Program Numbers, which begin at #0.