Mirage DSK-1 Manual page 50

The VELOCITY SENSITIVE FILTER SUS- TAIN parameter makes the sustain level dependent
on key velocity. At value 0, key velocity will not effect the sustain frequency. Increasing the
value will make the filter sustain level more sensitive to key velocity (increased key velocity will
raise the sustain frequency).
49/Filter Release vs (00-31)
The VELOCITY SENSITIVE FILTER RELEASE parameter makes the release rate of the filter
frequency dependent on key-up velocity (how fast you let up the key). Increasing the value will
make the release rate more sensitive to key-up velocity (increased key-up velocity will shorten
the release rate.)
50/Attack Rate (00-31)
Controls the rate at which the volume will rise to the peak when a key is played. At VALUE 0 it
is instant and at VALUE 31 the amplitude will take 30 seconds to reach the peak.
51/Peak Level (00-31)
Controls the maximum amplitude that will be reached at the top of the attack slope. It is
adjustable from no sound at VALUE 0 to maximum output at VALUE 31.
52/Decay Rate (00-31)
Controls the rate at which the amplitude descends from the peak level to the sustain level. At
VALUE 31 it will take 30 seconds for the amplitude to fall to the sustain level. At VALUE 0 it
will drop instantly to the SUSTAIN level.
53/Sustain Level (00-31)
Sets the amplitude level that the note will play at between the end of the decay segment and the
time you release the key. At VALUE 0 there will be no output after the decay and at VALUE 31
the sustain will be at the maximum level.
54/Release Rate (00-31)
Controls the rate at which the amplitude descends to 0 after the key is released. At VALUE 31 it
will take 30 seconds to reach 0 and at VALUE 0 the amplitude will fall instantly to 0.
55/Attack vs (00-31)
Makes the ATTACK RATE dependent on key velocity. At VALUE 0 key velocity will not effect
the attack rate. Increasing the value will make the attack rate more sensitive to keyboard velocity
(increased key velocity will shorten the attack rate).