Multiple Wavesample Wavetables Tables - Mirage DSK-1 Manual

Play the sound The Mirage is now sampling the sound. While it's
sampling you'll see the middle bar and when the
sample is completed you'll see...
MULTIPLE WAVESAMPLE WAVETABLES
Each half of memory can contain up to eight individual wavesamples. When more than one
wavesample is used, you must select the location in the memory for each wavesample. The
accompanying chart gives some suggestions where to set the beginning and ending parameter
values for each wavesample. You can, however, allocate the Mirage's memory in any way you
want, which will depend on the amount of memory necessary for different wavesamples.
In order to be able to display all 256 segments, or Pages, in the memory on the two-digit display,
a hexadecimal system (base 16 to math buffs) of both numerals and alphabet characters is used.
See the note at the bottom of the Memory Chart for an explanation of hexadecimal.
Once you decide how many wavesamples your wavetable will have, setting the parameters will
follow the same procedure for each wavesample.
SF
(sampling
finished)