Available Features Enabled By Administrators; Outgoing Intercom Calls; Calls; Missed Call Summary Subscription - Aastra 6753i User Manual

Hide thumbs Also See for 6753i:
Table of Contents

Advertisement

Available Features Enabled by Administrators

There are features on your IP Phone that you can use ONLY if an Administrator has enabled them on your phone. Those
features are described in this section. Contact your System Administrator for more information.

Outgoing Intercom Calls

If your System Administrator configures the outgoing intercom feature on your phone, pressing the Icom key allows your
phone to find an available line and place an intercom call to a recipient. To use this feature, you must configure an inter-
com key on your phone. For more information about configuring and using an Icom key, see

Missed Call Summary Subscription

A feature on the IP phones allows missed calls that have been redirected by the server, to be incremented in the missed
calls indicator on the phone it was initially directed to. This feature is called the Missed Call Summary Subscription and
can be configured by your System Administrator. For this feature to work, you must configure voicemail on the phone that
the call was initially directed to.
For example, phones A, B, and C are connected to the server. Your Administrator configures the server to direct calls com-
ing into phone B (which has voicemail configured) to be forwarded to phone C. When phone A calls phone B, the server
forwards the call to phone C. With the Missed Call Summary Subscription enabled, phone B receives notification from
the server that the call was forwarded and the missed calls indicator is incremented on phone B. See the illustration below.
Note:
Your System Administrator can configure the Missed Call Summary Subscription feature on a global or per-line basis.

Customizable Callers List Key

Your System Administrator can specify an XML URI that creates a custom Callers List application for your phone. When you
press the Callers List key, the phone accesses a custom XML URI Callers List instead of the standard Callers List. Contact
your System Administrator for more information.

Autodial (Hotline and Warmline)

Your System Administrator can configure an autodial feature on your phone. If autodial is enabled, the phone automati-
cally dials a pre-configured number whenever it is off-hook. Depending on the configuration specified by your Adminis-
trator, the Autodial functions as either a "hotline", or as a "warmline, " as follows:
Hotline: The IP phone immediately dials a pre-configured number when you lift the handset
Warmline: The IP phone waits for a specified amount of time after you lift the handset before dialing a pre-configured
41-001380-00 REV01 – 06.2013
Phone A
A calls B
Phone B
Missed calls indicator increments on phone B.
Note: : Voicemail must be configured on phone B.
Phone C
B fowards call to C
"Intercom Key"
on
page
88.
164

Advertisement

Table of Contents
loading

Table of Contents