SATO CL608e Operation Manual page 50

6. Cleaning and Maintenance
Cleaning the Platen
Step 1
Step 2
Step 3
Step 4
Step 5
Platen
Head Latch
Step 6
44
Switch OFF the power to the printer.
Open the label access door.
Open the print head assembly by pushing the head
latch toward the rear of the printer. The print head
assembly is spring-loaded and will automatically
open as soon as the head latch is disengaged.
Apply any SATO approved thermal printer cleaner to
a clean wipe.
The platen is the rubber roller directly below the print
head. It should be cleaned of any ribbon or label res-
idue.
Repeat as necessary. The platen should be cleaned
whenever foreign matter such as dust or adhesive is
present.
Operation Manual
CL608e/612e