Connecting To Ac Power And Charging The Battery - Becker BE7977 User Manual

1.3 Connecting to AC Power and Charging the
Battery
When charging the battery for the very first time, you should charge it for at least
8 hours.
1. Slide and click the connector converter onto the AC charger.
2. Connect the charger cable to the bottom of your device.
3. Plug the AC charger into a wall outlet.
The charge indicator glows amber when charging is in progress. Do not
disconnect your device from AC power until the battery is fully charged, when the
charge indicator turns green. This will take a couple of hours.
NOTE:
Do not immediately turn on your device after connecting the AC charger to charge a
power-depleted battery. If you need to turn on the device again, wait for at least one
minute.
Your device can also be charged when it is connected to a desktop computer via the USB
cable.
CAUTION: For optimal performance of the lithium battery, take note of the following:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging. You can charge the battery
before it is discharged.
If you will not use the product for a long period of time, be sure to fully charge the
battery at least once every two weeks. Over discharge of the battery can affect the
charging performance.
Converter
5