Connection To The Mains Outlet; Connecting Power Supply; Tmc Antenna; Gps-Antenna - Becker Traffic Assist Z 201 Operating Instructions Manual

Hide thumbs Also See for Traffic Assist Z 201:
Table of Contents

Advertisement

>>>
GENERAL OPERATION

Connection to the mains outlet

> D
!Danger!
> GB
Ensure that you do not have wet hands
> F
and that the power supply unit is dry.
Only connect the power supply unit to
> I
a permissible mains power supply.
> E

Connecting power supply

> P
Connection to the public mains grid is
> NL
achieved using the optionally available
mains power supply unit. Please proceed
> DK
as follows to connect to the mains:
> Open the cover on the left side of the
> S
unit of the Traffic Assist.
> N
> Hold the USB connector at the corru-
gated grip area and push it into the con-
> FIN
necting socket of the Traffic Assist as far
as the stop without employing excessive
> TR
force.
> Insert the plug of the power supply unit
> GR
into the socket.
> PL
Note:
> CZ
Remove the power supply unit when not
using the Traffic Assist for longer periods
> H
of time.
> SK
18

TMC antenna

The TMC antenna included in the acces-
sories is used to receive traffic announce-
ments.
> Push the connector of the TMC anten-
na into the socket provided on the back
of the carrier plate without using exces-
sive force.
Note:
The TMC antenna must be routed so
that your ability to drive the vehicle is not
impaired.

GPS-antenna

Unit antenna

The GPS antenna is integrated into the
housing.
Note:
The integrated GPS antenna is not suita-
ble for use in vehicles with anti-glare win-
dows (metalised thermo-glass or metal
foil, indicated by the window label - SIG-
LA SOL, SIGLA CHROM, SIGLA,
KOOL-OF, SUNGATE, etc.) and vehi-
cles with fine-meshed heating wires in
the windows.
If this is the case, use an external GPS an-
tenna. Please consult your local specialist
dealer.

Advertisement

Table of Contents
loading

Table of Contents