Checking Or Clearing Timers - Bang & Olufsen BEOSOUND 9000 Manual

34
> Using the timer
Press to check your timers
CHECK
then
L
Press to see timer programming
number, source and program
or
M
number of individual timer entries
Press repeatedly to display the
OK
details of a particular programming
When the display reads OK ?
then
L Press to display NEXT ? to see your
next timer programming entry
or
M
then
Press to see your next entry
OK
– If there are no more entries,
NO MORE, will appear on the display
Press clear while information
CLEAR
regarding a timer programming is
displayed on the display –
CLEARED will appear on the display
after pressing CLEAR

Checking or clearing Timers

You can look up each Timer
programming entry to check its
contents or cancel it completely.
On the displays (as illustrated to the
right) the following information will
appear:
• The timer's number on the list of
timers together with source and
program number
• Times for starting and stopping
• Date for the timer or days it is
programmed to perform a timer play
or timer stand-by
When you have displayed all the
details of a particular Timer
programming, you can choose to see
the next Timer programming to check
L
or clear it. Press the or
reveal the display NEXT and press OK to
accept it.
You can choose to clear a timer by
pressing CLEAR when you are
displaying and checking the details of
it. If you press CLEAR to clear a timer,
the display will briefly read CLEARED
and the Timer will be cancelled.
Display of timer programming entries in
numerical order with source and program
number, clearing is possible...
Display of times for starting and stopping,
clearing is possible...
Display of days which the timer is programmed
for. If it is a one-off timer programming, the date
of the timer will be displayed. Clearing is
possible...
M
buttons to