Bang & Olufsen BEOSOUND 9000 Manual page 35

Switching the Timer function to on or off
The timers you have programmed into
the BeoSound 9000 can all be executed
with or without activating the loud-
speakers which are either directly
connected to the BeoSound 9000 or are
connected to it via BeoLink*.
The timer ON/OFF function decides
whether a Timer play can be heard on
the loudspeakers.
In order to hear your Timer Play
programming entries you must activate
the loudspeakers in the room or rooms
where you want music by switching the
timer function to ON. If you set the
timer function to OFF, the speakers will
be muted.
*Please refer to page 43 for information about
BeoLink.
So if you choose to set the speakers
next to your BeoSound 9000 to OFF,
but set your extra speakers in your
bedroom to ON, the Timer Play will be
carried out and you will hear it
through your extra speakers in your
bedroom.
However, if all timer functions on the
speakers next to the BeoSound 9000 as
well as on all your BeoLink connected
systems are set to OFF, a timer will not
be activated.
Press to cut in or press again to
cut out the loudspeakers –
When you first press ON/OFF
TIMER ON or TIMER OFF will appear on
the display according to the setting
you have previously made
35
ON/OFF