Bang & Olufsen BEOSOUND 9000 Manual page 45

BeoSound 9000 without speakers – AV system...
The BeoSound 9000 CD-player can also
be used in a Bang & Olufsen fully
integrated AV system*.
In an AV system, you have direct access
to all your audio and video sources –
and they are all heard through the
same set or sets of loudspeakers.
To play a source in the AV system, all
you have to do is press a single button
– either directly on the systems (audio
or video) or on the remote control.
The Beo4 remote control integrates
remote operation of all the sources in
the AV system.
If the BeoSound 9000 is used in a fully
integrated system and you are
recording an audio source on Video
tape, you will not be able to perform
any control functions on this source.
*Note: Only certain types of Bang & Olufsen video
systems are equipped to master fully integrated
AV systems – operated with the Beo4 remote
control. Please contact your Bang & Olufsen
dealer for further information concerning
appropriate video systems.
Beo4 remote control and AV system...
In a fully integrated Bang & Olufsen AV system,
the AV* LIST button on the Beo4 remote control
gives access to an extra function:
• Simulcast radio/TV transmissions...
To watch a TV program while listening to the
sound from a radio program at the same time,
press TV then LIST until AV* is displayed then
RADIO on the Beo4 remote control. (Simulcast
radio/TV transmissions can be recorded on the
video tape recorder.)
If BeoSound 9000 is in a fully integrated system
with BeoVision Avant, you can record sound from
TV, Satellite or Video tape onto an Audio tape
recorder connected to the BeoSound 9000 AUX-
socket:
• Recording in fully integrated system...
Prepare your tape recorder for recording, then
press e.g. TV, then LIST until AV* is displayed,
then RECORD on Beo4, and make sure you start
your recording on your tape recorder. In order
to stop or control your recording, use the
control panel on your connected tape recorder,
this is not possible via Beo4.
If you change source, however, while you are
recording, the recording will be spoiled and the
tape recorder will start recording this new source.
There is no record lock when you are recording
via the BeoSound 9000 AUX-socket.
Recording onto Audio tape recorder is not
possible if the BeoSound 9000 is used in a fully
integrated system with BeoSystem AV9000.
*Note: In order to display AV on Beo4, you must
add the function. Please refer to Beo4's own
User's guide for further instruction.
When BeoSound 9000 is used in a fully integrated
Bang & Olufsen AV system, the video system takes
over some of the functions mentioned in this
guide.
If BeoSound 9000 is connected with BeoVision
Avant, the functions related to timer play and
adjustment of sound levels are carried out via the
TV, but volume regulation is possible on the
BeoSound 9000.
In an AV system, the loudspeakers (two or four)
are connected to the video system.
Furthermore, in an AV system all remote control
operations (audio and video) must be directed to
the video system.
45