Bang & Olufsen BEOSOUND 9000 Manual page 47

The display shows that you have pressed SELECT in
order to choose which discs to play.
The display shows that the random order playback
function for the multi CD player is cut in.
The display shows that the edited playback
function for the multi CD player is cut in.
You have pressed EDITING and the display shows
that track no 10 on the chosen CD is now being
scanned or played for 15 seconds and can be
included or excluded from a sequence.
The display shows that the CD list is empty and
that no names or sequences have been chosen.
The display shows that, because your BeoSound is
connected to a TV e.g. BeoVision Avant, you must
program Timers and check Timers via the TV
menus.
You have pressed TIMER to program a Timer and
the display prompts you to choose when you want
your timer to start.
The display prompts you to choose when you
want the timer to stop. A stopping time will
appear automatically on the display.
If you have programmed 15 Timers already and
attempt to program a new Timer, you will see this
cue appear on the display.
The display shows that the TIMER function is on
and that the system or loudspeakers will be cut in
when a Timer is carried out.
RANDOM OFF will indicate that the random order
playback is cancelled.
EDIT OFF will indicate that the edited playback is
cancelled.
In a fully integrated system with a BeoVision
Avant, TREBLE, BASS, BALANCE and LOUDNESS
are TV OPERATED.
The current time will appear automatically.
It is set to 1 hour after the starting time you have
chosen.
You have to clear some of your timers to program
new ones.
TIMER OFF will indicate that the system will not be
cut in even though a Timer is being executed.
47