Listing Cds - Bang & Olufsen BEOSOUND 9000 Manual

22
> Using the Compact Disc player
Press to play CD
CD
Press to access the naming list
NAMING
CD LIST appears briefly, then the
then
name of the current CD appears
NAMING
L
Press to list the names one by one
or and return to names further up the
M
list
Press to clear a name while the
CLEAR
appropriate name is displayed
Press to return to normal source
CD
operation

Listing CDs

All the CDs you have named or
programmed track series on can be
displayed one by one without you even
having to load these CDs.
The list is useful if you want to quickly
leaf through all the CDs which are
included on the CD list.
If a CD has not been named but a track
series has been programmed on it, it
will appear on the CD list as e.g. DISC 3
indicating the number it has been
assigned on the list. However, a CD can
of course both have a name and a
programmed track series attached in
which case only the name will appear.
You can clear an entry on the CD list
while you are leafing through the list.
If you choose to clear a CD entry, you
will clear the name you may have given
the particular CD and the track series
you may have programmed as well as
the position you may have
programmed for the CD.
If you attempt to name or program track series
for more than 200 CDs the display will read
CD LIST FULL , and you will have to clear an entry
before you can add another.
Note: If the carriage is situated on a CD which has
been given a name or the CD has been edited, the
name or number of this CD will appear on the
display when you access the list. If the CD under
the carriage is unknown, the CD list will appear
on the display and you have to press the
buttons to get a name or number displayed.
L M
or