Bang & Olufsen BEOSOUND 9000 Manual page 6

6
Whether you place BeoSound 9000 on a table,
vertically or horizontally on the wall or on the
specially designed BeoSound 9000 stand, you can
adjust the position of the operation panel in
order to facilitate your operation of the
Please refer to the setting-up guide for
instructions of how to remove and replace the
The BeoSound 9000 radio only becomes visible
when it is being used. The display then lights up
with radio program information.
P R I N C I P L E S
Operation Panel
BeoSound 9000.
operation panel.
Radio
Mains switch
O F O P E R A T I O N
L
The LOAD button is situated in a low position on
the BeoSound 9000.
Direct CD selection button
A selection button is situated next to all 6
Compact Disc compartments in a low position on
the BeoSound 9000. Press this button to play the
CD in the compartment.
Compact Disc player
The BeoSound 9000 contains 6 Compact Disc
compartments and a carriage moves between
compartments and enables CD playback. You
move the carriage by pressing the direct CD
selection button next to the CD compartment.
When you switch the BeoSound 9000 to stand-by,
the carriage will always situate itself next to
the operation panel and the CD compartment
number 1.
If you choose to place the BeoSound 9000
vertically, the carriage will move to the top end of
BeoSound 9000. If you choose to place the
BeoSound 9000 horizontally, the carriage will
situate itself next to the operation panel.
• Stand-by button
The STAND-BY button is situated in a low position
on the BeoSound 9000.
Socket for headphones
Load button