Naming Radio Programs - Bang & Olufsen BEOSOUND 9000 Manual

Naming radio programs

You can name all the radio programs
you have stored. Choosing a name is
completely up to you.
This may help you remember a
program not only by its program
number but by a particular name.
When you are listening to a radio
program, its name will appear on the
display.
Once you have completed "writing"
your name, you store the name and it
will then appear every time you choose
this program again.
If you happen to make a mistake or
change your mind while you are
naming a radio station, just press the
NAMING button again – and start over.
If you want to clear the name after you
have keyed it in, press CLEAR instead
of OK and the name you have keyed in
will be erased.
The name may contain up to 12 characters,
including numbers
If you have left the naming function
and want to clear the name, just press
NAMING again and then CLEAR to
clear the name in question. Press
RADIO to leave the naming function
and the name will be cleared.
If you do not name your programs, the
station's own name may appear
instead, provided such a name is being
transmitted by the radio station itself*.
*Note: Such a name can only be transmitted if
your BeoSound 9000 is equipped with the RDS
facility.
Press to turn on the radio program
you want to name
Press to start the naming function
The first of the twelve character
positions blinks, indicating that you
can start "writing" a name
Press to reveal the characters one
by one
Press to reveal previously shown
characters
Press to move to the next character
position
Press to store the name of the
radio station
NAMING OK will appear on the
display
or
Press to store the name and exit the
naming function
You can press RADIO at any time to
store and exit the naming function
To clear a name...
Press to access the naming function
Press to clear the name
27
RADIO
NAMING
L
or
M
then
OK
then
OK
RADIO
NAMING
then
CLEAR