Bang & Olufsen BEOSOUND 9000 Manual page 37

BEO4
Press LIST to display CLOCK on
LIST
Beo4
then
Press to see the time
GO
then
Press again to see the date and
GO
year
Nice to know about timers...
• When you have programmed a Timer, make
sure that the timer indication is on which
will indicate that the loudspeakers will be
activated. If this is not the case, your Timer
will not be carried out. Please refer to page
35 for further information.
• If you use the BeoSound 9000 in a fully
integrated Bang & Olufsen AV system (see
pages 44-45), you have to set the Timer func-
tion to ON or OFF via the TV. The display on
the BeoSound 9000 will read TV OPERATED.
• If BeoSound 9000 is connected with
BeoVision Avant, you must set e.g. timer play
via the TV. If you press TIMER or CHECK on
the BeoSound 9000, the display will inform
you that the function is TV OPERATED and you
must program or check the function via the
TV. If your BeoSound 9000 is connected with
a BeoVision Avant in a fully integrated
system, TREBLE, BASS, BALANC E and
LOUDNESS are TV OPERATED. Please refer to
your TV user's guide for further information.
• If your BeoSound 9000 is BeoLink connected
with a BeoVision TV set other than BeoVision
Avant, you can program timer play or
stand-by on BeoSound 9000 for CD, RADIO,
TV, SAT, V.TAPE.
37