Fine Tuning A Radio Station; Mono/Stereo Reception - Bang & Olufsen BEOSOUND 9000 Manual

26
> Using the radio
Press to turn on the radio program
RADIO
you want to fine tune
Press to start the fine tuning
TUNE
function
then
TUNE
L
Press to fine tune your program
towards a higher or lower frequency
or
M
then
Press to accept your fine tuned
OK
program
then
Press again to store program and
OK
program number
Press to turn on the relevant radio
RADIO
program
Press to choose MONO or STEREO
TUNE
then
TUNE
then
TUNE
then
L
Press to switch from stereo to mono
or
M
Press to store your new tuning on
OK
the program number

Fine tuning a radio station

If the radio station is not tuned in
clearly enough, it may be because the
station needs to be fine tuned.
The fine tuning function enables you
to move slowly through the
frequencies, or to detune a station
slightly because of noisy reception.
Just follow the instructions to the left,
and listen carefully as you proceed...

Mono/stereo reception

If you have tuned in to an FM station
broadcasting a stereo signal, this signal
will be stored along with the radio
program.
Your BeoSound 9000 automatically
switches to mono if the stereo signal is
not strong enough to produce an
acceptable stereo sound.
However, you can overrule this
automatic function if you wish and
select mono manually. See how to do it
on the left of this page.
Once you have fine tuned your
program, you can choose a different
program number for your radio
program if you like before you store it.
Please refer to Presetting radio
stations on page 24 for further
information.
The choices for the settings are indicated on the
displays – stereo or mono sound