Naming Cds - Bang & Olufsen BEOSOUND 9000 Manual

Naming CDs

You can give a short name of your own
choice to the CDs in your private CD
collection and name the track series
you have programmed on individual
CDs.
You can name the individual CDs when
you start playback. If you have already
entered a name, this name will appear
on the BeoSound 9000 display panel.
You "write" the name of your CD or
CD track series by pressing the
buttons and the OK button. Follow this
procedure until you have chosen your
last character and then you must store
the name.
Note: If you make a mistake or change your mind
while you are naming your CD or track series, just
press the NAMING button again – and start over
or press CLEAR to clear what has been keyed in.
or
The name can consist of up to 12 characters,
including numbers. If you have not given a name
to the CD, the track number, track time or elapsed
time will appear on the display instead. BeoSound
9000 allows you to store 200 entries which include
names and/or track series for CDs.
L M
or
Press to play CD
Press to access the naming function
Press to reveal the characters or
numbers one by one
Press to move to next character
position
Press to store the name
Press while you are naming CDs or
track series in order to automatically
store the name and exit the naming
function
To clear a name, follow this procedure...
Press to access the naming function
Press to clear the name
Then,
Press to return to normal source
operation
21
CD
then
NAMING
then
L
or
M
then
OK
then
OK
CD
NAMING
then
CLEAR
CD