Page 2
Legal Notice: For the Canadian market only! CAUTION: To prevent electric shock do not use the polarized plug, attached to this apparatus, with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. CAUTION: To reduce the risk of electric shock, do not remove cover (or back).
BeoSound 3000 – the fully integrated music system Whenever you reach out to operate the BeoSound 3000, the glass doors slide open as if by magic, inviting you in to the music. The BeoSound 3000 is a fully integrated music system with both radio and CD player.
• Delete series of CD tracks, 7 20 Delete a series of tracks a video system • Radio, 8 9 BeoSound 3000 – with speakers – with a • Volume, 8 video system 9 BeoSound 3000 in another room Name your CDs...
Page 5
27 Change the PIN code instruction sequence. 27 Switch off the PIN code 27 Using a Master code RADIO Buttons on the BeoSound 3000 PLAY close-up operation >>> panel or on the Beo4 remote control...
6 Connect the products to the the sides for the glass doors to open. mains. • If you want to hang the BeoSound 3000 on a wall, make sure that you use the correct size and type of screws and wall plugs for mounting the The program list for TV is now called up.
Connect the cables You can use your BeoSound 3000 in a stand-alone setup or connected to Auxiliary a Bang & Olufsen video system using equipment AM aerial FM aerial the Master Link cable. The Master Link socket on the back of BeoSound...
BeoSound 3000. • Fasten the two glass doors, one at a time, to the front of the BeoSound 3000 by pressing their fastening points into the corresponding fastening sockets on the BeoSound. • Press gently on each of the fastening points until you hear a click.
Audio/video setup When you have connected your The BeoSound 3000 has three different option settings: BeoSound 3000 to the mains, you Option 0. Used in a fully integrated Audio/Video must make sure that it is set up to Option 2...
However, STORE acts as a short cut, skipping intermediate levels and stores your settings directly. NOTE! When BeoSound 3000 is used in a fully integrated Bang & Olufsen Audio/Video system, sound must be adjusted as described in the guide for the video system.
Press STORE to store the new setting. STORED STORED appears NOTE! When the BeoSound 3000 is used in a fully integrated Bang & Olufsen Audio/Video system, the clock must be set in the video system, the CLOCK button on BeoSound 3000...
Tune in radio stations available radio stations for you, and then store them on a program Letting the BeoSound 3000 tune in your radio number of your own choice. You stations, ensures that you get all available stations. Once you have found a radio station, then access the station directly by you can fine tune it, if the reception is poor.
Page 13
Move stored radio stations Delete radio stations Name radio stations If you have found a radio station and stored it You can delete a stored and named radio You can give a short name of your own choice under the first available program number, you station at any time.
The BeoSound 3000 memorises up press any other button or switch to CD before to 15 such Timer programmings and the Timer has been stored in BeoSound 3000, you can use it to e.g. wake you up in the Timer is cancelled.
Page 15
Check the Timers Delete a Timer You can check your Timers, the check function When you call up a list of your Timers, you can also be used to correct Timers. can delete any Timer you want. TIMER Press TIMER to access TIMER Press TIMER to access the function.
CD has reached on the button. When you lift your finger off the button, the CD resumes playing. the end, then BeoSound 3000 will switch to standby after 30 minutes if you do not operate it. RADIO...
Understand and change the displays The displays on BeoSound 3000 give You can switch between different types of information by pressing DISPLAY repeatedly you various types of information. when the radio or CD player is switched on. The upper display gives you specific...
If you use the scan function, the first Note: If you cancel the random play function while Note: If you switch off the BeoSound 3000, or if 15 seconds of each track on the CD the CD is playing, all tracks beyond the current you select another source, the repeat function will is played.
Page 19
OFF appears forward to the place you want scanned where you want the Note: If you switch off the BeoSound 3000, or if passage to end PLAY Press PLAY to cancel you select another source, the repeat function will the scanning process >>>...
Play favourite CD tracks only The edit function enables you to Play or delete a series of tracks Select and store a series of tracks program series of tracks for your individual CDs and memorise them Once you have edited a CD and selected your Before making your own series of tracks you permanently.
You can call up a list of CD names in the dis- when you load the CD. You can store BeoSound 3000. If the CD has already been play. When the list is displayed, you can delete named, you can change the name or delete it,...
Avoid extreme heat and humidity, and never write on your CDs. NOTE! Do not use alcohol or other solvents to clean any part of the BeoSound 3000. We do not recommend using special cleaning CDs in the BeoSound 3000.
Search through a CD for further explanation. STOP Press to pause playback any time Press to resume playback – The GO buttons equals PLAY on the BeoSound 3000 operation panel LIST Press to display extra buttons or functions*, e.g. LIST EXIT...
Bang & Olufsen products, you can distribute the sound from your sources throughout your home. When BeoSound 3000 is used in a fully In an AV integrated setup, a pair of active Many different set-ups are available, integrated AV setup, the speakers are speakers are connected to the BeoSound please contact a Bang &...
However, if you choose to activate If the PIN code system is activated and your The PIN code system is easily activated, and the system, your BeoSound 3000 is BeoSound 3000 is disconnected from the you choose the four-digit code yourself.
Page 27
Master code from Bang & Olufsen. within a period of 3 hours. system. Once you have keyed in this code, your BeoSound 3000 is operational again and the PIN code system is deactivated. Press twice when the Press twice when the...
For your information… Your needs as a user are given careful consideration during the design and development process of a Bang & Olufsen product and we strive to make our products easy and comfortable to operate. Therefore, we hope that you will take the time to tell us about your experiences with your Bang &...
Page 31
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a This product fulfils the conditions stated in the EEU directives 89/336 and 73/23.