Troubleshooting - BLADEZ VeloPro HW3017B Owner's Manual

RESISTANCE ADJUSTMENT:
Pedaling resistance is controlled by the tension knob. Properly adjusting the seat will help reduce
the risk of injury and ensure maximum exercise efficiency and comfort. The appropriate position
while using this bike is when one pedal is in the bottom position, the other leg is slightly bent at the
knee. To adjust the seat height simply turn the adjustable knob loose, then pull the knob to move the
seat up or down to the desired height (there are different seat height positions for adjustment).
To adjust the seat position turn the adjustable knob loose then pull the knob to move the seat
forward or backward to the right position.
HANDLEBAR ADJUSTMENT:
There are different handlebar heights that can be adjusted.
Please adjust the seat height first then adjust the proper height of handle bar to match the seat.
BELT ADJUSTMENT:
The belt has been pre-adjusted and should not require immediate attention. Continuous use of the
bike may cause the belt to stretch or become loose prompting the need for belt adjustments. If so,
simply loosen the bolts on both side of flywheel and pull forward until the belt becomes tight.
HOW TO LEVEL THE BIKE:
There are 4 knobs under the rear and front stabilizers. Adjust the knobs to achieve level and stability
for the bike.
tension knob
1240mm
1070mm
TROUBLE SHOOTING
MAINTENANCE INSTRUCTION
1. The safely level of the equipment can only be maintained
If it is regularly examined for damage and/or wear and tear.
2. Care must be taken when lifting or moving the equipment so
as not to cause injury. To move the bike, lift the bike by the
rear stabilizer until the weight is transferred completely to the
front rollers and then move. Alternately, stand in front; press
the handlebar downward to raise the rear up until the weight
transferred to the front rollers and then move
3. The brake pad is most susceptible to wear. Before
Exercising inspect braking system for functionality.
505mm
15