BLADEZ VeloPro HW3017B Owner's Manual page 14

ASSEMBLY INSTRUCTIONS (cont'd)
STEP 5
Slide the seat post (4) into the main
frame (1) and secure it with the
spring loaded knob.
Securely attach the seat (64) to the
seat bar (5). Slide the seat bar (5)
into the seat post (4) and tighten
the spring loaded knob to secure it
Notice: When tightening, both of the pedals should be turning toward the front of the bike
STEP 6
Carefully mount the pedals into the crank
arms.
The right-hand pedal, marked with the letter
(R),screws onto the right-hand crank, also
marked with an (R). First, hand turn the
pedal onto the crank in a clockwise direction
until tight, then use wrench to tighten
further.
The left-hand pedal, marked with the letter
(L),screws onto the left-hand crank, also
marked with an (L). First hand turn the
pedal onto the crank in a counterclockwise
direction, then use wrench to tighten further.
12