Maintenance - BLADEZ VeloPro HW3017B Owner's Manual

MAINTENANCE INSTRUCTIONS
CLEANING
Care has been taken to assure that your bike has been properly adjusted and
lubricated at the factory. It is not recommended that the user attempt service on
the internal components. Instead, seek service from an authorized service center.
However, from time to time, the outer surfaces may appear dull or dirty. Follow
the instructions below will restore and preserve the original finish.
Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth
rag with a light application of car wax. Do not use aerosol spray or pump bottles
as they may deposit harmful substance on the console surface.
Over time, the console surface may collect dust or finger prints. The use of harsh
chemicals will destroy the protective coating and cause a static build up that will
damage the components. This surface may be cleaned with specially prepared
chemicals found in most computer supply stores. It is strongly recommended that
you employ such a cleaning compound.
14