Appendix A - Accessories And Spare Parts; Ticket Alignment; A.1.1 Ticket Alignment - Custom Engineering s'print User Manual

APPENDIX A - ACCESSORIES AND SPARE PARTS

A.1 TICKET ALIGNMENT

A.1.1 Ticket alignment

Paper stock with alignment marks is permitted so that tickets of a fixed length or with pre-printed areas may be
utilized.To guarantee proper alignment, the "Alignment" parameter must be enabled under setup using the key
(see: setting configuration parameters)
The notch mark must be placed on the termic side of the ticket itself (printable area); the label dimension is:
0,5
25,4 *
Applicable only for the label printer version (s' print-LP1 model) :
Using a paper roll with the characteristics as shown in fig. A.1, pressing the multifunction key to align
automatically the ticket at first printed line (see fig. A.2).
Otherwise using a different model of paper roll this additional functionality of the key is not available; to align the
ticket it's necessary using a $1D $F6 command.
Printout result with alignment
at first printed line
pressing the multifunction key
Printout result with alignment
at first printed line
5
0,5
* The value showed with on asterisk in the fig.A1 indicates the minum
dimension controlled
A- 1
Pinting Test
First
Second
Third
Pinting Test
First
Second
Third
Pinting Test
First
Second
Third
DPT100-B/I/BT
(Fig.A.1)
(Fig.A.2)