Appendix II: Installing the camera
Before the installation
Warning
USB 2.0 interface
Checking the interface
The SC30 can be used with the operating systems Windows XP and Windows
Vista. The installation procedure for the camera will be described separately for
the Windows XP and the Windows Vista operating systems.
In order to avoid problems, you'll have to follow the steps of the procedure in the
order given here.
Install the software first, before connecting the camera to the PC.
1)
Install the software on your PC.
2)
Mount the camera onto your microscope.
3)
Connect the camera to your PC and select the camera driver.
If you want to use the camera, you will need to have a USB 2.0 interface
available on your PC. If you are not sure whether a USB 2.0 interface is available
on your PC, open the Windows Device Manager via
Panel > System > Hardware > Device Manager...
An entry with, e.g., the name 'Intel®82801FB/FBM USB2 ENHANCED HOST
CONTROLLER' in the USB Controller area indicates that the required interface
is available.
Start > Settings > Control
.