Olympus SC30 User Manual page 22

Acquiring and saving images
New Click the
12)
Confirm by clicking OK.
The Calibrate Image
A magnification is now available in the
You will be asked whether or not you want to replace the old data with
the new ones, should data about the calibration already exist for this
magnification.
13)
Finish the calibration by clicking Close.
The calibration will be directly applied to the active image.
You can expand additional calibration data for other magnifications
whenever you like.
To calibrate additional images based on the set calibration data, use the
Apply calibration
You can view the calibration data of an image any time, by double click-
ing the image buffer to open the
Description of the dialog box
New button to create a new set of calibration data. This set of calibra-
tion data appears under the selected camera name. This is, for example, useful
if you use your camera on various microscopes.
This is how you create a new set of calibration data:
1)
Click the New button.
The DCCalib dialog box is opened.
2)
Enter a name into the edit field located in the
Please note: The
always be marked. In this case, the calibration data are automatically
adjusted by the software when setting another image resolution.
dialog box will be closed.
button.
Image Information
Pixel size linked to image size
Define Calibration dialog box.
dialog box.
DCCalib dialog box.
check box should