Olympus SC30 User Manual page 57

USB connecting cable
Camera
C-Mount Adapter
1)
Remove the protective cap from the camera.
2)
Firmly screw the TV adaptor and the C-Mount (0.5x or bigger") onto the
camera. This should be done with the microscope mount facing down to
minimize the chance of dust landing on its surface.
3)
Install this assembly onto the microscope's camera mount. Some micro-
scopes may require additional optical elements installed between the
camera mount and the C-mount adapter. You may also need to align the
orientation of the microscope with that of the stage, and also match the
focus of the camera image with that of the eyepiece image. These settings
can be done later when you are able to obtain an image on the screen.
4)
Plug the end of the camera's USB 2.0 cable into a free socket of your PC.
Should more than one USB slot be available, you can make an arbitrary
choice of which jack you use.
5)
Continue with the camera driver registration before starting your software.
Appendix II: Installing the camera
PC with image acquisition software
and USB 2.0 interface
USB 2.0 plug