Olympus SC30 User Manual page 28

Additional commands
Preview
[Del] Use the [Del] key to delete the selected files or directories.
Open
You can view the single images to the right of the dialog box, thus allowing you
to check which documents you want to open. To do so, click the
and select the individual image files. The selected document will be displayed in
reduced size.
Click the Preview button a second time to view the file's document properties
with various additional information. When using TIF images, the image attribute
Name gives you the image name,
acquired or created, Resolution
x bit depth, Compression
of the image acquisition software,
and Channel the camera with which the image was acquired.
A third click enables you to hide preview.
You can also use the commands of the drop-down menu located to the right of
the button, to switch back and forth between the preview, properties, and stan-
dard view without the preview area.
Open enables you to load images into a sequential image buffer.
Loading images stored on the hard drive
1)
In the image buffer box, click the image buffer you wish to load the image
into, with the left mouse button. Select - for example - image buffer #5.
The selected image buffer will be highlighted in color.
2)
Click the Open button to load an image.
The Open Image
3)
Select Tagged Image Format
of type list.
This format is the default when you open this dialog box for the first time.
4)
Click the Up One Level
of your computer.
In the field below the button bar you will find a list of all sub-folders and
documents of the file type selected.
5)
Doubleclick on one of the folders listed to get a listing of its contents - i.e.,
all subdirectories and files the folder contains.
6)
Click the Preview button to view thumbnails of image files. Select the image
files one at a time.
7)
Select the images you wish to load.
8)
Click the Open button to load the images selected.
The Open Image
The images will be loaded into successive image buffers. You will find
the first image in the active image buffer, e.g., #5. The next images can
be found in image buffers 6-9, if you have simultaneously loaded a total
of 5 images.
The image type and image name will be shown directly in the image
buffer box. You will, for example, acquire "true-color images" when
using the SC30 camera. A true-color image consists of 2
(24 Bit).
Created the date and time the image was
the image resolution in height x width (in pixels)
the method of compression,
Application the program version being used,
dialog box will appear.
(*.tif), the standard image format, in the
button to move up a level in the directory structure
dialog box will be closed.
Preview button
User the name of the user
Files
24
color values