Olympus SC30 User Manual page 48

Appendix II: Installing the camera
Warning
Mounting the camera
Install the image acquisition software before connecting your camera to your PC.
This is necessary so that the operating system does not install the wrong TWAIN
camera driver.
The diagram shows a typical installation on a light microscope. You should have
all of the required components ready at hand.
USB connecting cable
Camera
C-Mount Adapter
1)
Remove the protective cap from the camera.
2)
Firmly screw the TV adaptor and the C-Mount (0.5x or bigger") onto the
camera. This should be done with the microscope mount facing down to
minimize the chance of dust landing on its surface.
3)
Install this assembly onto the microscope's camera mount. Some micro-
scopes may require additional optical elements installed between the
camera mount and the C-mount adapter. You may also need to align the
orientation of the microscope with that of the stage, and also match the
PC with image acquisition software
and USB 2.0 interface
USB 2.0 plug