File List - Olympus SC30 User Manual

Additional commands
Two page layouts are
predefined. Print either
one or six images on a
page.
Each image has its own
header when using
numerous images.
Single Image
Multiple Images
Print images The
Displayed image Choose the
All images Select the
Range of images
(Option)
Frame You can enter the width of the frame which is to be displayed around each image
Number of copies You enter the number of copies you would like to have printed into the
OK

File list

Select the Single Image
header contains the image name, while the footer contains the date and time of
print.
Select the Multiple Images, to print 6 images on one page, respectively. Each
image then automatically contains a header with the image name.
Print images group enables you to determine which images you want to
print. The selected images are then printed in the page layout which you selected
from the Page layout list. In doing so, the number of pages printed will automat-
ically refer to the number of images selected. These are, for example, 3 pages,
should you want to print 3 images with the
Displayed image
buffer.
All images option to print all of the images in the image buffer box.
Select the Range of images
buffer box. To do so, you enter the number of the image buffers whose images
you would like to print, into the corresponding field. Each number is separated
by a comma. The order of the image buffers in the field corresponds with the
order in which the images are to be printed. This allows you to control the order
of several images on a page. Several consecutive image buffers can be replaced
by an interval. For example, you can write 4-7 instead of 4,5,6,7.
into the Frame field. The unit is a 1/4 point. The setting "0" means that no frame
is to be printed.
of copies field.
OK enables you to close the dialog box and start printing.
Use the display of the path names at the end of the
corresponding images.
The most recent images to be saved and loaded are displayed in the file list.
Click the desired file name or type in the corresponding number using your key-
board.
The file name remains even if you exit and restart the program.
entry when wanting to print one image per page. The
Single Image
option to only print the image in the active image
option to print a range of images from the image
page layout.
Number
File menu to quickly load the