Hardware Installation; Installing The Camera Head - Olympus DP80 Instructions Manual

3

HARDWARE INSTALLATION

3-1 Installing the Camera Head

1
c
a
b
e
a
2
The camera head and camera adapter are precision modules.
CAUTION
Be careful not to drop them during attaching or detaching.
When you attach/detach the camera, be sure to keep placing it
on the stable table or desk.
} The following procedure deals with the case using the U-TV0.63XB
B4-mount camera adapter.
1
Rotate the adapter mounting area
2
arrow direction to loose it sufficiently, and adjust it so that the positioning
d
groove
2
Fit the positioning pin
with the positioning groove
camera adapter toward the camera head. Then, while securing the
camera adapter
a
adapter temporarily.
3
Tighten the mounting screw
Allen screwdriver to fix it completely.
f
3
Attach the camera adapter to the camera port of the microscope.
4
b
comes roughly in the center of the notch
e of the camera adapter U-TV0.63XB
b
d with your hand, rotate the adapter mounting area
under the camera head in the arrow direction to fix the camera
f of the camera head with the provided
a
under the camera head in the
c
.
of the camera head, and push the
DP80
d
19