Apply Calibration - Olympus SC30 User Manual

Delete Click the
Calibrate... Click the
Graph >> Click the

Apply calibration

3)
Confirm by clicking OK.
A new entry is added to the
Calibration dialog box. Since there are no calibration data for this
camera, the Magnification
Delete button to delete the active set of calibration data.
Calibrate... button to add new calibration data to the active set.
Graph >> button to show a diagram with the calibration data. Use this
diagram to check your calibration data. The diagram shows the reciprocal pixel
size versus magnification. The points should all be along one line.
Click this button to calibrate the active image using the available calibration data.
Should there not be any appropriate calibration data available, use the
calibration command to create the calibration data, as described starting on
page 20.
1)
Acquire an image or click on the image buffer in which the image to be
calibrated has been stored.
2)
Click the Apply calibration
The Apply calibration
3)
Select the appropriate set of calibration data from the
4)
Select the magnification you used to acquire the image from the
tion list.
In the list, you will find all of the magnifications which you defined for this
camera name using the
You may also enter a magnification which is not in the list. In this case,
the software automatically interpolates the correct calibration data.
5)
Confirm the message by clicking OK.
6)
Doubleclick the image buffer to open the
order to view the calibration data.
The Magnification,
adapted to the calibration data.
Only if you save the image in TIF file format, will the calibration data be
saved together with the image.
Camera name
list will be empty.
button.
dialog box opens.
Define calibration
Image Information
Width and Height values have now been accordingly
Acquiring and saving images
list located in the Define
Define
Camera name list.
Magnifica-
command.
dialog box in