Olympus SC30 User Manual page 49

focus of the camera image with that of the eyepiece image. These settings
can be done later when you are able to obtain an image on the screen.
4)
Plug the end of the camera's USB 2.0 cable into a free socket of your PC.
Should more than one USB slot be available, you can make an arbitrary
choice of which jack you use.
5)
Continue with the camera driver registration before starting your software.
Selecting the camera driver
After connecting the camera to your PC, the
Wizard will automatically start.
Registering the camera driver
The camera driver is automatically installed when setting up your image acqui-
sition software. The camera driver is not signed and therefore will not be used
automatically by Windows XP. After having installed the image acquisition
software and having connected the camera to the computer, you must register
the camera driver with Windows XP.
1)
Windows XP opens the
2)
Select the No, not this time
An additional Found New Hardware Wizard
Appendix II: Installing the camera
Found New Hardware Wizard
option and click the
Found New Hardware
dialog box.
Next > button.
dialog box opens.