Set Input - Olympus SC30 User Manual

Acquiring and saving images

Set Input

The Set Input command
opens the dialog box
with the with the same
name.
Related Topics
Define calibration 20
Apply calibration 23
Save As 24
4)
Click the Define calibration
for the X/Y calibration of your images.
This step is only necessary if you would like to carry out a XY calibration
of your images and the required calibration data is not yet available.
5)
Click the Apply calibration
This step is only necessary if you would like to calibrate the acquired im-
age.
You can always calibrate an image at a later time.
6)
Click the Save As
medium.
Click this button to select a camera. This is only necessary when several cam-
eras are available and the wrong camera has been selected.
Your image acquisition software enables you to manage several cameras. Each
camera is assigned to a predefined "logical input channel" within the software -
if the camera driver has been correctly installed. If you want to acquire an image
with a camera, the corresponding input channel must be activated.
Only one input channel can be activated. It will be highlighted in color in the dia-
log box's list and additionally displayed in the lower right part of the program win-
dow's status bar.
Click the New Channel
camera.
button to determine the calibration data required
button.
button to save the image as an image file to a storage
button to create a new input channel for an additional