Audio Adjustments (Kdc-X898, Kdc-Bt858U); Audio Control - Kenwood KDC-X998 Instruction Manual

4. Audio adjustments (KDC-X898, KDC-BT858U)

4-1. Audio control

You can adjust the audio control items.
1
Press [SRC] and select a source other than
Standby ("STANDBY") using [Control] knob.
Refer to <Source selection> (page
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
4
Select a audio control item using [Control]
knob.
Display Audio control item Range
"SubWoofer Level" Subwoofer level
"Bass Level" Bass level
"Middle Level" Middle level
"Treble Level" Treble level
"Equalizer PRO"[1]
"Bass Adjust"
"Bass Center FRQ" Bass Center Frequency 60/ 80/ 100/ 200 (Hz)
"Bass Level" Bass level
"Bass Q Factor" Bass Q Factor
"Bass EXT" Bass Extend
"Middle Adjust"
"Middle Center Middle Center
FRQ" Frequency
"Middle Level" Middle level
"Middle Q Factor" Middle Q Factor
"Treble Adjust"
"Treble Center Treble Center
FRQ" Frequency
"Treble Level" Treble level
"Preset Equalizer" Preset Equalizer curve "Drive Equalizer"/
"Bass Boost" Bass Boost
"Loudness" Loudness
"Balance" Balance
"Fader" Fader
"SubWoofer" Subwoofer output
16
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
14).
<3-3. How
13).
–15 — +15 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
1.00/ 1.25/ 1.50/ 2.00
OFF/ ON
0.5/ 1.0/ 1.5/ 2.5 (kHz)
–8 — +8 (dB)
0.75/ 1.00/ 1.25
10.0/ 12.5/ 15.0/
17.5 kHz
–8 — +8 (dB)
"Top40"/ "Powerful"/
"Rock"/ "Pops"/ "Easy"/
"Jazz"/ "Natural"/
"User"[3]
"OFF"/ "Level1"/
"Level2"/ "Level3"
"OFF"/ "Level1"/
"Level2"
Left 15 — Right 15
Rear 15 — Front 15
ON/ OFF
"Detailed Settings"
"HPF" High Pass Filter
"LPF SubWoofer" Low Pass Filter
"SubWoofer Subwoofer Phase
Phase"[4]
"Supreme"[5] Supreme setting
"Audio Preset" Audio Preset
memory[2]
"Volume Offset" Volume offset
[1]
Function of KDC-X898.
[2] Refer to <4-2. Audio preset> (page
preset recall> (page 17).
[3]
"User": The customized Bass, Middle, and Treble settings
are effective.
[4]
Displayed only when "LPF SubWoofer" is set to "85"/
"120"/ "160".
[5]
Audio file source only
5
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
Adjusting Bass, Middle, and Treble levels
• You can set Bass, Middle, and Treble levels for each source.
Through/ 100/ 120/
150 (Hz)
85/ 120/ 160/ Through
(Hz)
Reverse (180°)/
Normal (0°)
OFF/ ON
Recall/ Memory
–8 — ±0 (dB)
(AUX: -8 — +8)
17), <4-3. Audio