Displaying The Firmware Version; Switching Between Two Connected Cell-Phones - Kenwood KDC-X998 Instruction Manual

Bluetooth settings

18-4. Displaying the firmware version

You can view the version of the firmware of this
unit.
1
Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Settings" > "Detailed Settings"
F/W Update" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
The firmware version appears.
Exiting from the Bluetooth mode
Press [Ú].
How to update
• For how to update the firmware, access our web site.
www.kenwood.com/cs/ce/bt/
82
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
> "BT
<3-3. How
13).
18-5. Switching between two
connected cell-phones
When two Bluetooth devices are connected, you
can assign the Bluetooth device to be used in
priority to the other Bluetooth device.
1
Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Device Priority" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
3
Select a "Sub –###–" using [Control] knob.
"Main": Device used normally.
"Sub": Device used only for call reception.
4
Press [Control] knob.
Exiting from the Bluetooth mode
Press [Ú].
<3-3. How
13).