Auxiliary Input Display Setting; Demonstration Mode Setting - Kenwood KDC-X998 Instruction Manual

14-3. Auxiliary input display setting

You can set the display when switched the AUX
source.
1
Press [SRC] and select an Auxiliary Input
("AUX") source using [Control] knob.
Refer to <Source selection> (page
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Settings" >
[Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
4
Select a display ("AUX", "DVD", "PORTABLE",
"GAME", "VIDEO", or "TV") using [Control]
knob.
Exiting from the Function setting mode
Press and hold [1/6].
14).
"AUX Name Set" using
<3-3. How
13).

14-4. Demonstration mode setting

You can turn on/off the demonstration mode.
1
Press [Control] knob.
Enters the Function setting mode.
2
Select "DEMO Mode" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
3
Select a setting ("ON" or "OFF") using [Control]
knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].
<3-3. How
13).
65
|
English