Audio Adjustments; Audio Control; Adjusting The Detail Of Audio Control; Rear Volume - Kenwood KDC-X592 Instruction Manual

Audio Adjustments

Audio Control

You can adjust following Audio Control items ;
Adjustment Item Display

Rear volume

"REAR VOLUME" 0 — 35
Subwoofer level "SUB-W LEVEL"
System Q

"NATURAL"/

"USER"/"ROCK"/

"POPS"/"EASY"/

"TOP40"/"JAZZ"/

Bass level* "BASS LEVEL"
Middle level* "MIDDLE LEVEL" –8 — +8
Treble level* "TREBLE LEVEL"

Balance

"BALANCE"
Fader "FADER"
Exit Audio Control mode (Volume control mode)
* You can adjust these items in detail. Refer to <Adjusting
the detail of Audio Control> (Page 15). (Function of KDC-
X592)
* Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
⁄
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Select the source to adjust
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2
Enter Audio Control mode
Press the [AUD] knob.
3
Select the Audio item to adjust
Press the [AUD] knob.
4
Adjust the Audio item
Turn the [AUD] knob.
5
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or [0]
and [ATT] button.
Range
–15 — +15
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz
(The indicator turns on
according to the setting.)
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
Function of KDC-X592

Adjusting the detail of Audio Control

Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
Bass level
Adjustment Item Display
Bass Center Frequency "BASS FRQ"
Bass Q Factor "BASS Q FACTOR"
Bass Extend "BASS EXT"
Middle level
Adjustment Item Display
Middle Center Frequency "MIDDLE FRQ"
Middle Q Factor "MIDDLE Q FACTOR" 1.00/2.00
Treble level
Adjustment Item Display
Treble Center Frequency "TREBLE FRQ"
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 15).
2
Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [AUD] knob.
4
Adjust the Detail Audio item
Turn the [AUD] knob.
5
Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
⁄
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob, [0] and
[ATT] button.
Range
40/50/60/70/80/100/
120/150 Hz
1.00/1.25/1.50/2.00
OFF/ON
Range
0.5/1.0/1.5/2.0 kHz
Range
10.0/12.5/15.0/17.5 kHz
15
|
English