Setting The Song And Artist Alerts; Song Or Artist Setting - Kenwood KDC-X998 Instruction Manual

SiriusXM® Satellite Radio (optional tuner and service required)
19-13. Setting the Song and Artist
Alerts
When the broadcast of the song by the registered
artist or the broadcast of the registered song starts,
a message appears to allow you to switch the
current source to the desired channel, even though
the receiving source is other than SiriusXM Satellite
Radio.
Registering content
1
Receive the content you wish to register.
2
Press and hold [Control] knob.
3
Select a content type using [Control] knob.
"Store Artist?": Store artist information.
"Store Song"?: Store song information.
"Artist Stored" or "Song Stored" appears.
Number of content alerts that can be stored
• You can register a total of 50 types of content including
both artists and songs.
When a Song or Artist Alerts occurs
1
A content alert message is displayed.
When multiple content alerts occur, a content
name is displayed one after another. The previous
content name can be displayed and selected by
the operation in step 3.
A content alert message is displayed for five
seconds from the last content alert.
The following switching operation to your desired
content can be performed while the message is
being displayed.
2
Press [Control] knob.
3
Select the content using [Control] knob.
The current source switches to the channel that is
broadcasting the selected content.
When the Song or Artist is not displayed
• The Content Alert message is not displayed, when
operating in various modes: Bluetooth mode
Receiving a call> (page 72)), Audio Control mode
Audio control> (page 16), <5-1. Audio control> (page
18)), Function setting mode
setting> (page 93)), etc.
• A Content Alert occurred can be selected from "My Music"
category <19-3. Category and channel search> (page
Exiting Content Alert mode
Press [1/6].
90
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
(<16-1.
(<4-1.
(<19-20. SiriusXM tuner
85).

19-14. Song or Artist setting

You can turn on/off the content alert function.
1
Press [SRC] and select a SiriusXM ("SiriusXM")
source using [Control] knob.
Refer to <Source selection> (page
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Settings" > "Content Alert"
Set" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
4
Select "ON" or "OFF" using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
14).
> "Alert
<3-3. How
13).