Table of Contents
Advertisement
3. Basic operations
3-4. Adjusting the clock
1
Press [Control] knob.
Enters the Function setting mode.
2
Select "Settings" > "Clock&Date" > "Clock
Adjust" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
3
Set the hour using [Control] knob.
4
Set the minute using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
10
|
KDC-610U
3-5. General operations
Power
Press [SRC] to turn the power ON.
Press and hold [SRC] to turn the power OFF.
Source selection
1
Press [SRC].
The currently selected source is displayed and
enters the Source selection mode.
2
Select a source using [Control] knob.
Source
Display
Standby
"STANDBY"
SiriusXM (optional accessory)[1]
"SiriusXM"
Tuner
"TUNER"
USB device connected to front USB terminal
"USB(FRONT)"
USB device connected to rear USB terminal
"USB(REAR)"
iPod connected to front USB terminal[1]
"iPod(FRONT)"
iPod connected to rear USB terminal[1]
"iPod(REAR)"
Pandora® of iPod connected to front USB
"Pandora(FRONT)"
terminal[1]
Pandora® of iPod connected to rear USB
"Pandora(REAR)"
terminal[1]
iHeartRadio of iPod connected to front USB
"iHeartRADIO (FRONT)"
terminal [1]
iHeartRadio of iPod connected to rear USB
"iHeartRADIO (REAR)"
terminal [1]
CD[1]
"CD"
Auxiliary Input
"AUX"
[1] This source can be selected only when it can be played.
Setting the source switching
• Source switching can be set so that pressing [SRC] switches
among sources. For more details, refer to <11-6. Initial
settings> (page 34).
• Source switching can be set so that "Pandora", "iHeartRADIO"
and "AUX" sources can not be selected when not in use. For
more details, refer to <11-6. Initial settings> (page 34).
Volume
Turn [Control] knob.
USB terminal
A USB device or iPod can be connected.
The CA-U1EX (Max. 500mA) or KCA-iP102
(optional accessories) is recommended to
connect a USB device or iPod.
Auxiliary input
A portable audio device can be connected with
a stereo mini-plug (3.5 mm ø).
4. Audio adjustments
4-1. Audio control
You can adjust the audio control items.
1
Press [SRC] and select a source other than
Standby ("STANDBY") using [Control] knob.
Refer to <Source selection> (page 10).
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
4
Select a audio control item using [Control]
knob.
Display
Audio control item Range
"SubWoofer Level"
Subwoofer level
–15 — +15 (dB)
"Bass Level"
Bass level
–8 — +8 (dB)
"Middle Level"
Middle level
–8 — +8 (dB)
"Treble Level"
Treble level
–8 — +8 (dB)
"Preset Equalizer"
Preset Equalizer curve "Rock"/ "Pops"/ "Easy"/
"Top40"/ "Jazz"/
"Powerful"/ "Natural"/
"User"[2]
"Bass Boost"
Bass Boost
"OFF"/ "Level1"/
"Level2"/ "Level3"
"Loudness"
Loudness
"OFF"/ "Level1"/
"Level2"
"Balance"
Balance
Left 15 — Right 15
"Fader"
Fader
Rear 15 — Front 15
"SubWoofer"
Subwoofer output
ON/ OFF
"Detailed Settings"
"HPF"
High Pass Filter
Through/ 100/ 120/
150 (Hz)
"LPF SubWoofer" Low Pass Filter
85/ 120/ 160/ Through
(Hz)
"SubWoofer
Subwoofer Phase
Reverse (180°)/
Phase"[3]
Normal (0°)
"Supreme"[4]
Supreme setting
OFF/ ON
"Audio Preset"
Audio Preset
Recall/ Memory
memory[1]
"Volume Offset" Volume offset
–8 — ±0 (dB)
(AUX: -8 — +8)
[1] Refer to <4-2. Audio preset> (page 12), <4-3. Audio
preset recall> (page 12).
[2] "User": The customized Bass, Middle, and Treble settings
are effective.
[3] Displayed only when "LPF SubWoofer" is set to "85"/
"120"/ "160".
[4] Audio file source only
5
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
Adjusting Bass, Middle, and Treble levels
• You can set Bass, Middle, and Treble levels for each source.
|
English
11
Hide quick links:
Advertisement
Table of Contents
