Dsp Preset Recall - Kenwood KDC-X998 Instruction Manual

DSP settings (KDC-X998, KDC-BT958HD)
5-10. DSP preset
You can register the values set the DSP control
items.
1
Set the DSP control items
Refer to the following operations to setup the
Sound Control.
- "SubWoofer Level" of
18)
- <5-2. Manual equalizer control> (page 19)
- <5-3. Car type selection> (page 19)
- <5-4. Speaker setting> (page 20)
- <5-5. X'Over setting> (page 20)
- <5-6. Listening position setting> (page 21)
- <5-7. Delay time control> (page 22)
- <5-8. Channel level fine adjustments> (page
23)
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control"
Preset" > "Memory" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
4
Select a memory number ("Memory 1" or
"Memory 2") using [Control] knob.
5
Select "YES" using [Control] knob.
"Memory Completed" appears.
Exiting from the Function setting mode
Press and hold [1/6].
When reset
• When this unit is reset, all setting values stored in "Memory
1" are applied to the source.
24
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
<5-1. Audio control> (page
> "Pro Setup" > "Audio
<3-3. How
13).

5-11. DSP preset recall

You can recall the DSP control items registered to
the <5-10. DSP preset> (page
1
Press [SRC] and select a recall source using
[Control] knob.
Refer to <Source selection> (page
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control"
Preset" > "Recall" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
4
Select a recall memory number ("Recall 1" or
"Recall 2") using [Control] knob.
5
Select "YES" using [Control] knob.
"Recall Completed" appears.
Exiting from the Function setting mode
Press and hold [1/6].
24).
14).
> "Pro Setup" > "Audio
<3-3. How
13).