Audio Adjustments; Audio Control - Kenwood KDC-U7053BT Instruction Manual

Audio adjustments

Audio control

You can adjust the following audio control items;
Display Audio setting item Range
"SubWoofer Level" Subwoofer level
"Bass Level" Bass level
"Middle Level" Middle level
"Treble Level" Treble level
"Equalizer PRO"
"Bass Adjust"
"Bass Center FRQ" Bass Center Frequency 60/ 80/ 100/ 200 (Hz)
"Bass Level" Bass level
"Bass Q Factor" Bass Q Factor
"Bass EXT" Bass Extend
"Middle Adjust"
"Middle Center Middle Center
FRQ" Frequency
"Middle Level" Middle level
"Middle Q Factor" Middle Q Factor
"Treble Adjust"
"Treble Center Treble Center
FRQ" Frequency
"Treble Level" Treble level
"Preset Equalizer" Preset Equalizer curve "Rock"/ "Pops"/ "Easy"/
"Bass Boost" Bass Boost
"Loudness" Loudness
"Balance" Balance
"Fader" Fader
"SubWoofer" Subwoofer output
"Detailed Settings"
"HPF" High Pass Filter
"LPF SubWoofer" Low Pass Filter
"SubWoofer Subwoofer Phase
Phase"
"Supreme" Supreme setting
"Audio Preset" Audio Preset memory
"Volume Offset" Volume offset
† Refer to <Audio preset memory> (page 8), <Audio
preset recall> (page 8).
‡ "User": The customized Bass, Middle, and Treble settings
are effective.
⁄
• You can set Bass, Middle, and Treble for each source.
–15 — +15 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
1
1.00/ 1.25/ 1.50/ 2.00
OFF/ ON
2
0.5/ 1.0/ 1.5/ 2.5 (kHz)
3
–8 — +8 (dB)
0.75/ 1.00/ 1.25
10.0/ 12.5/ 15.0/
17.5 kHz
–8 — +8 (dB)
4
"Top40"/ "Jazz"/
"Powerful"/ "Natural"/
"User" ‡
"Level1"/ "Level2"/
"Level3"/ "OFF"
"Level1"/ "Level2"/
5
"OFF"
Left 15 — Right 15
Rear 15 — Front 15
OFF/ ON
Through/ 100/ 120/
150 (Hz)
85/ 120/ 160/ Through
(Hz)
Reverse (180°)/
Normal (0°)
ON/ OFF
Recall/ Memory
†
–8 — ±0 (dB)
(AUX: -8 — +8)
About Supreme
Technology to extrapolate and supplement with proprietary
algorithm, the high-frequency range that is cut off when
encoding at low bit rate (less than 128Kbps, Sampling
frequency is 44.1kHz).
Supplementing is optimized by compression format (AAC,
MP3 or WMA) and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate, variable bit rate or has minimal high frequency
range.
Select the source to adjust
Press the [SRC] button.
Enter the Audio control mode
Press the Control knob.
Select the audio item subject to adjustment
Turn the Control knob to select the audio item
subject to adjustment and then press the
Control knob.
Press the [ ] button to return to the previous
item.
Adjust the value set for the selected audio
item
Turn the Control knob to display the value to
adjust, and then press the Control knob.
The previous item is displayed.
Exit the Audio control mode
Press and hold the [ ] button.
|
English
7