Audio Adjustments; Audio Control; Adjusting The Detail Of Audio Control - Kenwood KDC-X792 Instruction Manual

Audio Adjustments
Middle level
- - -
Middle Center Frequency "MIDDLE FRO" 0.5/1.0/1.5/2.0 kHz
Middle 0 Factor "MIDDLE 0 FACTOR" 1.00/2.00
-_:-
Bass Center Frequency "BASS FRO" 40/50/60/70/80/100/
....,....- 120/150 Hz
-=-Ba:.:.:ss~O...:..::Fa:..:..:ct.:.:..or---
"BASS
0
FACTOR"
-:-1.oo~/1-:-.25:-:-/1--:.5-0/,.-2.-00-
Bass Extend "BASS EXT" OFF/ON
10.0112.5/15.0/17.5 kHz "TREBLE FRO"
Treble level
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
•Treble level
For how to select Basic Audio items, see <Audio
Control> (page 23).
2
Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [AUD] knob.
4
Adjust the Detail Audio item
Turn the [AUD] knob.
S
Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
~
Function
of KDC-X792/X692
Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
Bass level
*
You can adjust these items in detail. Refer to <Adjusting
the detail of Audio Control> (Page 23). (Function of KDC-
X792/X692)
*
Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
g..
~
Exit Audio Control mode (Volume control mode)
,----
Rear volume "REAR VOLUME" 0- 35
.:..--=-----
Subwoofer level "SUB-W LEVEL' -15 - +15
~--:-:~~---
System
0
"NATURAL'/ Natural/User setting/Rock!
"USER"I"ROCK"/ Pops/Easy!Top 4O/Jazz
"POPS"I"EASY"/ (The indicator turns on
_ _ _ _ _ "TOP40" I"JAll"/ according to the setting.)
Bass level* "BASS LEVEL' -8 - +8
Middle level* "MIDDLE LEVEL' --8=----...:..::+...:.8----
Treble level* "TREBLE LEVEL' -8 - +8
~-:-::-~--,--:-::---
Balance "BALANCE" Left 15 - Right 15
Fader "FADER" Rear 15 - Front 15
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Select the source to adjust
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2
Enter Audio Control mode
Press the [AUD] knob.
3
Select the Audio item to adjust
Press the [AUD] knob.
4
Adjust the Audio item
Turn the [AUD] knob.
S
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob and
[An] button.
You can adjust following Audio Control items;
Audio Control
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob and [An]
button.
English
I
23