Audio Preset Recall - Kenwood KDC-X998 Instruction Manual

4-2. Audio preset
You can register the values set the Audio control
items.
1
Set the audio control items
Refer to <4-1. Audio control> (page
2
Select "Audio Control"
> "Audio Preset" >
knob.
For how to use [Control] knob, refer to
to select the item> (page
3
Select "YES" using [Control] knob.
"Memory Completed" appears.
Exiting from the Function setting mode
Press and hold [1/6].
Number of Audio preset memories that can be stored
• Register a pair of Audio preset memories. You cannot
register them by source.
When reset
• When you press the Reset button, audio control values of all
sources will be set to the values registered here.
Audio control items that can be registered
• The following Audio control items can be registered.
"Bass Center FRQ"*, "Bass Level", "Bass Q Factor"*, "Bass EXT"*,
"Middle Center FRQ"*, "Middle Level", "Middle Q Factor"*,
"Treble Center FRQ"*, "Treble Level", "SubWoofer Level", "HPF",
"LPF SubWoofer", "SubWoofer Phase"
*KDC-X898 only
16).
> "Detailed Settings"
"Memory" using [Control]
<3-3. How
13).

4-3. Audio preset recall

You can recall the Audio control items registered to
the <4-2. Audio preset> (page
1
Press [SRC] and select a recall source using
[Control] knob.
Refer to <Source selection> (page
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" > "Detailed Settings"
"Audio Preset" > "Recall" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
4
Select "YES" using [Control] knob.
"Recall Completed" appears.
Exiting from the Function setting mode
Press and hold [1/6].
17).
14).
<3-3. How
13).
17
|
English
>