Advanced User Configuration - Grandstream Networks HT701 User Manual

NAT This filed indicates the type of NAT connection used by the HT701.
Port Status Displays relevant information regarding the FXS port.
• FXS port is registered with its SIP Server.
• FXS Port user has set Do Not Disturb.
• FXS Port user has set his calls to be forwarded unconditionally to ext 613.
• FXS Port user has not set Busy or Delay call Forward.

Advanced User Configuration

Log in to the advanced user configuration page the same way as for the basic configuration page.
password is case sensitive and the factory default password for Advanced User is "admin".
Advanced User configuration includes the end user configuration and the advanced configurations
including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous
configuration. HT701 FXS SIP account has its own configuration page.
Table 10: Advanced Settings
Admin Password
Layer 3 QoS
Layer 2 QoS
STUN Server
Keep-alive interval
Use STUN to detect
network connectivity
Firmware Upgrade
and Provisioning
Grandstream Networks, Inc.
Port Hook Registration
FXS On Hook Registered
This contains the password to access the Advanced Web Configuration page. This field is
case sensitive. Only the administrator can configure the "Advanced Settings" page.
Password field is purposely left blank for security reasons after clicking update and saved.
The maximum password length is 25 characters.
This field defines the layer 3 QoS parameter which can be the value used for IP
Precedence or Diff-Serv or MPLS. Default value is 48.
Value used for layer 2 VLAN tag. Default setting is blank.
IP address or Domain name of the STUN server.
This parameter specifies how often the HT701 sends a blank UDP packet to the SIP
server in order to keep the "hole" on the NAT open. Default is 20 seconds. Minimum
value is 20 seconds.
Use STUN keep-alive to detect WAN side network problems. If keep-alive request does
not yield any response for configured number of times, the device will restart the TCP/IP
stack. If the STUN server does not respond when the device boots up, the feature is
disabled.
Enables HT701 to download firmware or configuration file through either the TFTP, HTTP
or HTTPS server.
HT-701 User Manual
Firmware Version 1.0.0.17
DND Forward Busy
Forward
Yes 613
Last Updated: 02/2012
Delayed
Forward
The
Page 19 of 31