Call Features - Grandstream Networks HT701 User Manual

C F
ALL EATURES
The HT701 supports all the traditional and advanced telephony features.
Table 7: HT701 Call Features
Key

Call Features

*02 Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729),
*0272616 (G726-r16), *0272624 (G724-r24), *0272632 (G726-r32), *0272640 (G726-r40),
*027201 (iLBC)
*03 Disable LEC (pe call) Dial "*03" + " number ". No dial tone is played in the middle.
*16 Enable SRTP
*17 Disable SRTP
*30 Block Caller ID (for all subsequent calls)
*31 Send Caller ID (for all subsequent calls)
*47 Direct IP Calling. Dial "*47" + "IP address". No dial tone is played in the middle. Detail see Direct
IP Calling section on page 12.
*50 Disable Call Waiting (for all subsequent calls)
*51 Enable Call Waiting (for all subsequent calls)
*67 Block Caller ID (per call). Dial "*67" + " number ". No dial tone is played in the middle.
*82 Send Caller ID (per call). Dial "*82" + " number ". No dial tone is played in the middle.
*69 Call Return Service: Dial *69 and the phone will dial the last incoming phone number received.
*70 Disable Call Waiting (per call). Dial "*70" + " number ". No dial tone is played in the middle.
*71 Enable Call Waiting (per call). Dial "*71" + " number ". No dial tone is played in the middle.
*72 Unconditional Call Forward: Dial "*72" and then the forwarding number followed by "#". Wait for
dial tone and hang up. (dial tone indicates successful forward)
*73 Cancel Unconditional Call Forward. To cancel "Unconditional Call Forward", dial "*73", wait for
dial tone, then hang up.
*74 Enable Paging Call: Dial "*74" and then the destination phone number you want to page.
*78 Enable Do Not Disturb (DND): When enabled all incoming calls are rejected.
*79 Disable Do Not Disturb (DND): When disabled, incoming calls are accepted.
*87 Blind Transfer
*90 Busy Call Forward: Dial "*90" and then the forwarding number followed by "#". Wait for dial tone
then hang up.
*91 Cancel Busy Call Forward. To cancel "Busy Call Forward", dial "*91", wait for dial tone, then
hang up.
*92 Delayed Call Forward. Dial "*92" and then the forwarding number followed by "#". Wait for dial
tone then hang up.
*93 Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial "*93", wait for dial tone,
then hang up.
Flash/Hook Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook
will switch to a new channel for a new call.
# Pressing pound sign will serve as Re-Dial key.
Grandstream Networks, Inc. HT-701 User Manual
Firmware Version 1.0.0.17
Page 14 of 31
Last Updated: 02/2012