Advertisement
§ Enable Firmware Upgrade (Op9onal)
1. Open the device's Web GUI on web browser.
2. Type password and click [Login]. Default password: admin
3. Click
[ADVANCED
SETTINGS]
Upgrade via: Select HTTP.
Firmware Server Path: Enter firmware.grandstream.com.
Automa9c Upgrade: Select Yes, check for upgrade every () minutes and input 10080 on field provided.
Firmware Upgrade and Provisioning: Select Always Check for New Firmware at Boot Up.
Once done, click [Apply] then click [Reboot]
※ Firmware upgrade will take a few minutes. Please do not unplug your device during the operaIon. If the upgrade
fails, reset the device then repeat the upgrade procedure. InstrucIons on how to reset your device are also included
in this manual.
Copyright © cloudippbx.com.
11
Advertisement
