Grandstream Networks GXW40XX User Manual page 21

DHCP hostname
DHCP domain
DHCP vendor class ID
PPPoE account ID
PPPoE password
PPPoE Service Name
Time Zone
Self Defined Time Zone
Language
Device Mode
NAT maximum ports
NAT TCP timeout
NAT UDP timeout
Uplink Bandwidth
Downlink Bandwidth
Enable UPnP support
Grandstream Networks, Inc.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
This option specifies the name of the client. This field is optional but may be
required by some Internet Service Providers. Default is blank.
This option specifies the domain name that client should use when resolving
hostnames via the Domain Name System. Default is blank.
Used by clients and servers to exchange vendor-specific information. Default is
HT500.
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point
Protocol over Ethernet) connection.
PPPoE account password.
This field is optional. If your ISP uses a service name for the PPPoE connection,
enter the service name here. Default is blank.
Controls how the date/time is displayed according to the specified time zone.
The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
It indicates a time zone with 6 hours offset with 1 hour ahead which is the US
central time.
It is positive (+) if the local time zone is west of the Prime Meridian and negative
(-) if it is east.
Prime Meridian (International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd
Tuesday etc)
The 3rd number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of
March to the 1st Sunday of November.
Default is English. Languages supported with voice prompt.
This parameter controls whether the device is working in NAT router mode or Bridge
mode. Save the setting and reboot prior to configuring the GXW.
Note: This option is not present on GXW4024
Maximum NAT ports, typically one connection per port.
Note: This option is not present on GXW4024
NAT TCP timeout in seconds
Note: This option is not present on GXW4024
NAT UDP timeout in seconds.
Note: This option is not present on GXW4024
ISP specified WAN uplink bandwidth
Note: This option is not present on GXW4024
ISP specified WAN downlink bandwidth
Note: This option is not present on GXW4024
If set to "Yes", the GXW40XX would act as an UPnP gateway for your UPnP enable
applications. UPnP - Universal Plug n Play
Note: This option is not present on GXW4024
GXW40XX User Manual
Firmware 1.0.4.2
Page 21 of 38
Last Updated: 06/2011