Relay - Siemens HiPath 1100 User Manual

Miscellaneous functions
Step by step
*90= CONTROL RELAY ON?
*90= CONTROL RELAY OFF?
*90
#90
or
*90= CONTROL RELAY ON?
*90= CONTROL RELAY OFF?
*90
#90
or
96
1

Relay

The relay on the HiPath 1120 music module is used to con-
trol all peripheral equipment, such as the door opener, etc.
N
Press this key.
Select and confirm.
or
or
Enter the code to activate or deactivate the relay.
If a Fax/DID feature was configured...
The relay can be controlled by a remote MF telephone
Required: The remote telephone must have a conver-
sation in progress with the system's programming ex-
tension.
N
Press this key.
Select and confirm.
or
or
Enter the code to activate or deactivate the relay.
j
Enter the system password at the remote telephone
(the default is: 31994).
[1] Activate (contacts closed) or Deactivate (contacts open) the relay
immediately or after a specified time (see Programming manual,
Relay and Sensors in HiPath 1120).