Relay Status Check; Acknowledging/Deactivating A General Alarm - Siemens HiPath 1100 User Manual

Step by step
MORE FEATURES?
*9414=RELAY STATUS?
*9414

Relay Status Check

This feature allows you to check whether the relay is ON
or OFF .
Required: System telephone with a display.
N
Press this key.
Select and confirm.
f
or
Enter the code for checking the status of the relay.
Acknowledging/deactivating a General
alarm
If the support technician configured the alarm feature
for your extension, it will ring whenever there is an
alarm condition on the HiPath 1100.
Answer the call to acknowledge that the alarm was de-
tected. If the alarm call is not acknowledged, a new at-
tempt at a call will be made (as programmed) and the
extension will ring again.
Required: The display shows "CALL: RLA CHK..."and
your telephone will ring three times (three short beeps)
at 4-second intervals.
^
Lift the handset.
or
n
Press this key. The LED comes on.
\
Replace the handset.
or
n
Press this key. The LED goes off.
Miscellaneous functions
97