Relay - Siemens HiPath 1100 User Manual

Miscellaneous functions
Step by step
66

Relay

The relay on the HiPath 1120 music module is used to
control all peripheral equipment, such as the door open-
er, etc.
To enable
n
Lift the handset.
qmd
Enter the code to enable the relay.
w
Wait for a confirmation tone.
t
Replace the handset.
To deactivate
n
Lift the handset.
rmd
Enter the code to deactivate the relay.
w
Wait for a confirmation tone.
t
Replace the handset.
If a Fax/DID facility was configured...
The relay can be controlled by a remote MF telephone
Required: The remote telephone must have a conversa-
tion in progress with the system's programming exten-
sion.
To enable
qmd
Enter the code to enable the relay at the remote tele-
phone.
p
Enter the system password at the remote telephone
(the default is: 31994).
w
Wait for a confirmation tone.
t
Replace the handset.
[1] Activate (contacts closed) or Deactivate (contacts open) the relay
immediately or after a specified time (see Relay and Sensors in
Programming manual, HiPath 1120).
1