Retrieving A Call On Hold; Account Code - Siemens HiPath 1100 User Manual

Step by step
RETURN TO HELD CALL?

*60=Account code?

*60

Retrieving a call on hold

This allows a call waiting for a consultation to be recov-
ered when the destination party of the consultation is
busy or does not answer.
Once the call is resumed, the destination is disconnect-
ed.
Required: A consultation was made and the destina-
tion is busy or does not answer.
Select and confirm.
or
*0
Enter the code to return to the first call.
w [
Wait to return. Proceed with the conversation.
Account code
External calls can be assigned Account codes which
provide more control over telephone costs. This infor-
mation may be presented on the billing ticket. An Ac-
count code is specified by a sequence of up to 10 ran-
dom digits (0...9). For example, the number of a lawsuit.
In system telephones, this feature is selected before or
during a call, using the menu, a Account code or a pro-
grammable key, according to the switch. Consult the
support technician for further information.
Required: Account codes must already be defined and
the system's support technician must have defined the
mode in which the feature works.
External outgoing calls
N
Press this key.
Select and confirm.
or
Dial the code to enter with the Account code.
or
[1] This information may or may not appear on the billing ticket (see
Programming manual - call detail report - Ticket Account code).
You do not require a Account code to dial emergency numbers.
When a "External line reservation"
count code will be stored to be used automatically later when the
"reserve" calls back.
Functions used during calls
1
page 32 is made, the Ac-
59